The 7-15 SuperFlex Partition is 7cm (2¾") in width, 15cm (5⅞") in height and 15cm (5⅞") front-to-back.​ ​
The area inside the partition is split up into two areas:​
- The first is 7cm (2¾") x 7cm (2¾"). The height is 15cm (5⅞").​
- The second is 7cm (2¾") x 8cm (3⅛"). The height is 15cm (5⅞").​ ​
When choosing the correct SuperFlex it is important to remember that the walls and the partitions have a little flexibility so may fit lenses slightly wider than you expect if you are happy with a snug fit. ​ ​
Please note: All SuperFlex Partitions are 15cm (5â…ž") front-to-back.
ATTACH USING VELCRO®
All SuperFlex partitions attach using the Velcro® strips that are inside the 5-series, 7-series and 550 bags.
The latest bags have two Velcro® strips on the inside walls, whereas older models have only one strip of Velcro®. SuperFlex partitions should still attach using only one Velcro® strip you may just need to push down as you secure the partition.
Some of our very old bags don't have this Velcro® sewn in, contact us if you need advice on this.
DESIGN
Each Superflex Partition is 15cm (5⅞") front to back with a sewn in partition at varying measurements.​ ​
SuperFlex Partitions do NOT have a base in them, as they are designed to be used in conjunction with the SuperFlex base.​ ​
SuperFlex partitions allow you to keep equipment neat and tidy in our larger bags, whilst keeping your equipment protected.​ ​
You can store many items in SuperFlex partitions, from lenses and camera bodies to flashguns and cables.
WHAT IT FITS
First section 7cm (2¾") x 7cm (2¾"):
Quite a few small to medium micro-4/3 and mirrorless lenses will fit in this space. The space is designed to fit lenses that are 7cm (2¾") wide or less. Slightly wider lenses, for example up to 8cm (3⅛") can also be stored but will be a tighter fit.
Second section 7cm (2¾") x 8cm (3⅛"):
Quite a few small to medium micro-4/3 and mirrorless lenses will fit in this space. The space is designed to fit lenses that are 7cm (2¾") wide or less. Slightly wider lenses – for example up to 8cm (3⅛") can also be stored but will be a tighter fit. Alternatively, a Leica M body could be stored – a very small pancake lens could be attached to the body.
The '7-15' (along with the '6-15' and '6-12' sizes) fit in the Billingham Pola Stowaway bag. As this bag doesn't have Velcro® on the walls using one of these dividers is the only way to split the inside of the Pola bag into sections.
