The 11-21 SuperFlex Partition is 11cm (4⅜") in width, 21cm (8¼") in height and 15cm (5⅞") front-to-back.
The area inside the partition is split up into two areas:
- The first is 11cm (4⅜") x 11cm (4⅜"). The height is 21cm (8¼").
- The second is 11cm (4⅜") x 4cm (1⅝"). The height is 21cm (8¼").
When choosing the correct SuperFlex it is important to remember that the walls and the partitions have a little flexibility so may fit lenses slightly wider than you expect if you are happy with a snug fit.
Please note: All SuperFlex Partitions are 15cm (5⅞") front-to-back.
ATTACH USING VELCRO®
All SuperFlex partitions attach using the Velcro® strips that are inside the 5-series, 7-series and 550 bags.
The latest bags have two Velcro® strips on the inside walls, whereas older models have only one strip of Velcro®. SuperFlex partitions should still attach using only one Velcro® strip you may just need to push down as you secure the partition.
Some of our very old bags don't have this Velcro® sewn in, contact us if you need advice on this.
DESIGN
Each Superflex Partition is 15cm (5⅞") front to back with a sewn in partition at varying measurements.
SuperFlex Partitions do NOT have a base in them, as they are designed to be used in conjunction with the SuperFlex base.
SuperFlex partitions allow you to keep equipment neat and tidy in our larger bags, whilst keeping your equipment protected.
You can store many items in SuperFlex partitions, from lenses and camera bodies to flashguns and cables.
WHAT IT FITS
First section 11cm (4⅜") x 11cm (4⅜"):
Most large width lenses will fit in this space. Of course, the 21cm (8¼") height means the lenses can be quite long. For example a 70-200mm DSLR lens will usually fit well.
The space is designed to fit lenses that are 11cm (4⅜") wide or less. Slightly wider lenses – for example up to 12cm (4¾") can also be stored but will be a tighter fit.
Second section 11cm (4⅜") x 4cm (1⅝"):
This is quite a slim compartment and so it will likely only be usable for storing rolls of film, chocolate bars etc.
Some will struggle to get their hand all the way down when there is a lens in the first section!
Note: If purchasing this for a 70-200mm lens with a tripod mount the space in the first section is likely to be ok if you point the mount into the corner of the first section – but please check the dimensions of your lens compared to the dimensions of the insert to ensure you are happy. If you want a bit more room however look at the '12-21'.