The 10-18 SuperFlex Partition is 10cm (3⅞") in width, 18cm (7⅛") in height and 15cm (5⅞") front-to-back.​ ​
The area inside the partition is split up into two areas:​
- The first is 10cm (3⅞") x 10cm (3⅞"). The height is 18cm (7⅛").​
- The second is 10cm (3⅞") x 5cm (2"). The height is 18cm (7⅛").​ ​
When choosing the correct SuperFlex it is important to remember that the walls and the partitions have a little flexibility so may fit lenses slightly wider than you expect if you are happy with a snug fit. ​ ​
Please note: All SuperFlex Partitions are 15cm (5â…ž") front-to-back.
ATTACH USING VELCRO®
All SuperFlex partitions attach using the Velcro® strips that are inside the 5-series, 7-series and 550 bags.
The latest bags have two Velcro® strips on the inside walls, whereas older models have only one strip of Velcro®. SuperFlex partitions should still attach using only one Velcro® strip you may just need to push down as you secure the partition.
Some of our very old bags don't have this Velcro® sewn in, contact us if you need advice on this.
DESIGN
Each Superflex Partition is 15cm (5⅞") front to back with a sewn in partition at varying measurements.​ ​
SuperFlex Partitions do NOT have a base in them, as they are designed to be used in conjunction with the SuperFlex base.​ ​
SuperFlex partitions allow you to keep equipment neat and tidy in our larger bags, whilst keeping your equipment protected.​ ​
You can store many items in SuperFlex partitions, from lenses and camera bodies to flashguns and cables.
WHAT IT FITS
First section 10cm (3â…ž") x 10cm (3â…ž"):
Most medium-to-large width lenses will fit in this space.
The space is designed to fit lenses that are 10cm (3⅞") wide or less. Slightly wider lenses – for example up to 11cm (4⅜") can also be stored but will be a tighter fit.
Second section 10cm (3â…ž") x 5cm (2"):
Small slim camera bodies such as a Leica M10. Alternatively some slimmer speedlite flashes will fit too.